Crushers
SBMI has wide range of patterns for popular crusher parts. We have in-house expert team with well equipped pattern shop to develop crusher parts for taking measurements, preparing drawings and producing patterns which becomes key for quality castings.
Types Of Crusher Parts
- Jaw plates
- Side plates
- Cone & Mantle
- Bowl liner
- Tooth points
- Adopters
- Crusher hammer (Beater head type)
- Crusher hammer (Ring type - plain and toothed)
Benefits Of SBMI Crusher Parts
- Longer lifetime
- Lower operating cost
- Easy & safe installation
- Saving in labour & downtime
- Reduced wear rate
- Safety against breakage
- Reduced maintenance cost
- Consistently higher production
Jaw Plate
Bowl Liner/Mantle
Blowbars
TYPES OF HAMMERS OFFERED BY SBMI ARE
- Plain Ring Hammer
- Toothed Ring hammer
- Beater Hammer
- Impact Hammer
- Blow Bar
Grades & Specifications For Manufacturing Crusher Parts, Liners & Diaphragms (Mn Steel) By BAS
Alloys | Grade I | Grade II | Grade III | Grade IV | Grade V |
---|---|---|---|---|---|
Carbon (C) | 1.05% – 1.35% | 0.90% – 1.05 | 1.05% – 1.35% | 0.70% – 1.30% | 1.05% – 1.45% |
Silicon (Si) | 1.0% max. | 1.0% max. | 1.0% max. | 1.0% max. | 1.0% max. |
Manganese (Mn) | 11.0% – 14.0% | 11.0% – 14.0% | 11.0% – 14.0% | 11.0% – 14.0% | 11.0% – 14.0% |
Chromium (Cr) | – | – | 1.5% – 2.5% | – | – |
Phosphorus (P) | 0.08% max. | 0.08% max. | 0.08 % max. | 0.08 % max. | 0.08 % max. |
Sulphur (S) | 0.025% max. | 0.025% max. | 0.025% max. | 0.025% max. | 0.025% max. |
Nickel (Ni) | – | – | – | 3.0% – 5.0% | – |
Molybdenum (Mo) | – | – | – | – | 1.8% – 2.1% |
Hardness | 229 BHN max. | 229 BHN max. | 229 BHN max. | 229 BHN max. | 229 BHN max. |
© Copyrights 2017 | SREE BALAJI METACAST INDUSTRIES
Powered By Hepta Infotech Services LLP